OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P07D0

Transmission Mode Switch D Circuit High

Transmission mode switches select alternative shift programs such as sport, winter or tow/haul; the J2012 family runs from A (P071A–P071C) and B (P071D–P071F) to C (base code P078F), D and E. No manufacturer document available to us uses switches C to E; GM reads its analog mode switch under its own codes (low below 21–29 % of 5 V, high from 94 %, two trips) and newer drive mode selectors under P05D0–P05D3. P07D0 means the signal of mode switch D is above its upper limit – an open circuit or a short to positive. The opposite is P07CF.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / D0

Possible causes

  • Wire or connector to the button open high
  • Button open internally medium
  • Signal wire shorted to positive low

Symptoms

  • Mode D cannot be selected or stays active
  • Mode indicator missing or flashing
  • Transmission stays on the normal program

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P07D0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication