P07CC
Transmission Mode Switch C Circuit Low
Transmission mode switches select alternative shift programs such as sport, winter or tow/haul; the J2012 family runs from A (P071A–P071C) and B (P071D–P071F) to C (base code P078F), D and E. No manufacturer document available to us uses switches C to E; GM reads its analog mode switch under its own codes (low below 21–29 % of 5 V, high from 94 %, two trips) and newer drive mode selectors under P05D0–P05D3. P07CC means the signal of mode switch C is below its lower limit – a short to ground or a button stuck against ground. The opposite is P07CD.
Possible causes
- Signal wire shorted to ground high
- Button stuck pressed (switching to ground) medium
- Moisture or dirt in the button medium
- Control module low
Symptoms
- Mode C cannot be selected or stays active
- Mode indicator missing or flashing
- Transmission stays on the normal program
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P07CC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.