P07B6
Transmission Park Position Sensor/Switch A Circuit Performance High
With electronic gear selection the park position sensor/switch reports the park request or position. On GM's shift-by-wire selectors (2017 LaCrosse, XT4/XT5, Bolt EV, later SUVs and pickups) it is the P button, read by two redundant analog sensors A and B with separate 'released' and 'pressed' voltage zones. P07B6 is the 'high' side of the plausibility check of sensor A. No manufacturer document available to us uses this code; GM covers the band between its zones with one code (P07B5); CARB does not require separate codes for each side of a two-sided plausibility check. Park request or position is then unreliable.
Possible causes
- P button sensor faulty or worn high
- Knob not seated, button sticking medium
- Contact resistance in the connector medium
- Module software low
Symptoms
- Check engine light, 'service transmission' or 'unable to shift' message
- Park cannot be selected by button, or the car will not shift out of P
- P button illumination off
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P07B6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.