P07AF
Transmission Friction Element G Stuck On
Each friction element (clutch or brake) has three functional codes: slip while commanded locked (P079A ff), performance/stuck off – it does not apply or applies too weakly – and stuck on – it does not release. No manufacturer document available to us uses this code; the documented hybrids have at most five monitored clutches. The description follows the family: when clutch G should release, slip stays below the expected profile. A clutch that does not release ties up the transmission, causing jolts or stalling. Slip of the same clutch is P07A0.
Possible causes
- Clutch G stuck, welded or piston hanging high
- Valve or spool sticking in the applied position medium
- Contaminated fluid (debris) medium
- Module software low
Symptoms
- Check engine light or 'service hybrid system' message
- Jolt or tie-up on mode or gear changes
- Engine stalls or drags when stopping
- Limp mode with reduced power
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P07AF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.