OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P07AB

Transmission Friction Element E Stuck On

Each friction element (clutch or brake) has three functional codes: slip while commanded locked (P079A ff), performance/stuck off – it does not apply or applies too weakly – and stuck on – it does not release. GM's hybrid transmissions use only the stuck-on codes: when a clutch should release, the module expects slip to build and flags it if slip stays near zero – here only the Cadillac CT6 plug-in, whose transmission has a fifth clutch: it compares actual slip with the target release profile or detects missing slip while releasing, 2 s, after one trip. No other manufacturer document available to us uses it.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / AB

Possible causes

  • Clutch E stuck, welded or piston hanging high
  • Valve or spool sticking in the applied position medium
  • Contaminated fluid (debris) medium
  • Module software low

Symptoms

  • Check engine light or 'service hybrid system' message
  • Jolt or tie-up on mode or gear changes
  • Engine stalls or drags when stopping
  • Limp mode with reduced power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P07AB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication