P07A4
Transmission Friction Element B Performance/Stuck Off
Each friction element (clutch or brake) has three functional codes: slip while commanded locked (P079A ff), performance/stuck off – it does not apply or applies too weakly – and stuck on – it does not release. P07A4 concerns clutch B. Only Ford's DPS6 PowerShift dry dual-clutch uses it, for clutch B – input shaft 2 with reverse and gears 2, 4 and 6 – as 'functionally stuck off', next to the electrical codes of the clutch B actuator; Ford publishes no thresholds. GM's hybrids report clutch 2 only as slip (P079B) or stuck on (P07A5). A clutch that does not apply means missing even gears or reverse and limp mode.
Possible causes
- Clutch B plates worn or piston seal leaking high
- Too little apply pressure (fluid, pump, valve) medium
- Clutch actuator or valve sticking (DCT: electric actuator) medium
- Module software or lost adaption low
Symptoms
- Check engine light or transmission warning
- Gear missing or slipping, weak acceleration
- Limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P07A4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.