P07A0
Transmission Friction Element G Slip Detected
The 'friction element slip' codes monitor a clutch that is commanded locked in a power-split hybrid transmission: the module calculates its slip from electric motor, engine and output speeds (target 0 rpm) and flags slip above a threshold for a minimum time, with sufficient line pressure and clutch torque; from 2016 GM also flags a calculated friction energy threshold at once. The letter matches the manufacturer's clutch number. P07A0 concerns clutch 7. No manufacturer document available to us uses it – the documented hybrids (GM Two-Mode, Volt, Malibu Hybrid, CT6 plug-in, Chrysler Pacifica PHEV) have at most five monitored clutches. The description follows the family; clutch 7 would be the seventh friction element.
Possible causes
- Clutch G plates worn or glazed high
- Too little line pressure: low or aged fluid, filter, auxiliary oil pump or blocked pressure orifice medium
- Pressure or shift valve of clutch G or valve body sticking medium
- Module software (false setting) low
- Faulty speed signals (motor resolver, output) low
Symptoms
- Check engine light or 'service hybrid system' message
- Limp mode with reduced power or restricted drive mode
- Slipping, engine speed rises without drive
- Jolt when the engine starts or stops
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P07A0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.