OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P079B

Transmission Friction Element B Slip Detected

The 'friction element slip' codes monitor a clutch that is commanded locked in a power-split hybrid transmission: the module calculates its slip from electric motor, engine and output speeds (target 0 rpm) and flags slip above a threshold for a minimum time, with sufficient line pressure and clutch torque; from 2016 GM also flags a calculated friction energy threshold at once. The letter matches the manufacturer's clutch number. P079B concerns clutch 2. GM's Two-Mode flags above 200 rpm for 1 s, after two trips; the 2013 Volt above 200 rpm after one trip; Malibu Hybrid and Volt from 2016 100 rpm for 2.5 s at more than 15 Nm, or 5851 J of friction energy, after one trip. Chrysler's Pacifica PHEV lists it as friction element 2 with MIL and a permanent code.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 9B

Possible causes

  • Clutch B plates worn or glazed high
  • Too little line pressure: low or aged fluid, filter, auxiliary oil pump or blocked pressure orifice medium
  • Pressure or shift valve of clutch B or valve body sticking medium
  • Module software (false setting) low
  • Faulty speed signals (motor resolver, output) low

Symptoms

  • Check engine light or 'service hybrid system' message
  • Limp mode with reduced power or restricted drive mode
  • Slipping, engine speed rises without drive
  • Jolt when the engine starts or stops

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P079B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication