OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0798

Pressure Control Solenoid C Electrical

Pressure control solenoids are current-controlled proportional valves, and what B and C mean depends on the design: on GM's clutch-to-clutch automatics they are the pressure valves of clutches 2 and 3, on GM's CVT B is primary pulley pressure and C line pressure, on Jatco CVTs B is the secondary pressure valve, on Saab's AF40 B and C are clutch valves SLC1/SLC2. P0798 is the electrical code for valve C. Only Saab's 9-5 (2010–11) with Aisin AF40 uses it: a deviation between commanded and feedback current of clutch valve SLC2 (normal range 0.1–1.1 A), with the circuit codes P0969–P0971 alongside, rated after two trips. The module switches all solenoids off and keeps only second gear and reverse, without adaption. GM and Ford use the circuit codes P0968–P0971 instead.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 98

Possible causes

  • Clutch valve SLC2 coil faulty high
  • Wire or connector open or shorted medium
  • Transmission module damaged (e.g. after a short) low

Symptoms

  • Limp mode (second gear and reverse only)
  • Harsh shifts
  • Transmission warning or check engine light

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0798

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication