OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0796

Pressure Control Solenoid C Performance/Stuck Off

Pressure control solenoids are current-controlled proportional valves, and what B and C mean depends on the design: on GM's clutch-to-clutch automatics they are the pressure valves of clutches 2 and 3, on GM's CVT B is primary pulley pressure and C line pressure, on Jatco CVTs B is the secondary pressure valve, on Saab's AF40 B and C are clutch valves SLC1/SLC2. P0796 means valve C is electrically fine but pressure stays too low. GM's 6-speed flags 400 rpm slip in steady fourth gear with an intrusive test (4-5-6 clutch), the 8-speed 400 rpm for 1.5 s three times (clutch 3), the 9-speed clutch 3 slip over 200 rpm for 3 s, the CVT a line pressure deviation – all after one trip. GM noted false settings on 2017 8-speeds; a 9-speed bulletin calls for clutch inspection and a new valve body. Slipping, missing upper gears and limp mode follow.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 96

Possible causes

  • Clutch, return spring or piston seal of the assigned clutch faulty high
  • Valve body or pressure valve dirty or worn high
  • Fluid level low, fluid worn, filter clogged medium
  • Software false setting medium

Symptoms

  • Slipping or missing upper gears
  • Limp mode
  • Check engine light

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0796

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication