OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0790

Normal/Performance Switch Circuit

P0790 is the circuit fault of the normal/performance (sport or power program) selector of an automatic transmission – the older single code that preceded the mode switch codes P071A ff; the early J2012 list still called it 'circuit malfunction'. The switch is usually a button to ground or a resistor ladder; a fault is an invalid level, a permanently pressed button or an open circuit. No manufacturer document available to us describes it; GM uses P05D0–P05D3 for its drive mode selector today. The sport program is then unavailable or permanently on.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 90

Possible causes

  • Button faulty or sticking high
  • Wire or connector open or shorted medium
  • Liquid in the console medium
  • Control module low

Symptoms

  • Sport or performance program unavailable or always on
  • Mode indicator missing or flashing

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0790

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication