P078A
Shift Timing Solenoid B
'Shift timing solenoid' means different parts: on GM's 4L60-E the 3-2 downshift solenoid that times the band apply on that downshift, on Aisin five-speeds (GM, Saab) the linear valve SLS that sets clutch pressure during the shift, and on the 2017–18 Genesis G80/G90 with shift-by-wire the on/off solenoids that engage drive (A) and reverse (B). P078A is the general circuit code for solenoid B. The only documented user is Hyundai/Genesis: on the 2017–18 G80/G90 with shift-by-wire it is the on/off solenoid that engages reverse. The bulletins replace valve and electronic module, then the transmission module if the code returns. Reverse may not engage, with warning lamp and limp mode.
Possible causes
- Solenoid faulty high
- Electronic module or transmission module medium
- Connector or wire low
Symptoms
- Warning lamp
- Reverse cannot be engaged (Genesis shift-by-wire)
- Limp mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P078A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.