OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0785

Shift Timing Solenoid A

'Shift timing solenoid' means different parts: on GM's 4L60-E the 3-2 downshift solenoid that times the band apply on that downshift, on Aisin five-speeds (GM, Saab) the linear valve SLS that sets clutch pressure during the shift, and on the 2017–18 Genesis G80/G90 with shift-by-wire the on/off solenoids that engage drive (A) and reverse (B). P0785 is the general circuit code for solenoid A. GM's 2006 tables use it for the 3-2 downshift solenoid circuit (more than 43 of 50 failed counts, after one trip); Saab's 2002 Aisin box for an open or short in the SLS circuit with warning lamp and limp mode; Hyundai's Genesis bulletins for the drive solenoid, replacing valve and electronic module and then the module if it returns. Limp mode, harsh 3-2 downshifts or – on the Genesis – no drive follow.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 85

Possible causes

  • Solenoid coil open or shorted high
  • Connector or wire at the transmission (oil, corrosion) medium
  • Electronic module or transmission module driver medium

Symptoms

  • Warning lamp
  • Limp mode
  • Harsh 3-2 downshift (GM) or rough shifts (Aisin)
  • Genesis shift-by-wire: drive cannot be engaged

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0785

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication