P0784
4-5 Shift
Shift codes are a functional check of the gear change itself: the module compares the commanded shift with the speed trace and flags a shift that takes too long, is too short or abrupt, does not happen, flares or ties up. Ford does not use P0780–P0784 (its shift completion check feeds the solenoid codes), nor do GM's 2018–2025 tables. P0784 names the 4–5 shift as the faulty one, up or down; slip in a steady gear is reported by the ratio codes instead. It only exists on transmissions with five or more gears. No manufacturer document available to us uses this code; GM's 2006 five-speed tables run the shift time check under P0780. High engine speed on the motorway from a missing fifth gear is typical.
Possible causes
- Fluid level wrong, fluid worn or contaminated high
- Valve body, shift or pressure valve sticking high
- Worn clutches or bands medium
- Module software or shift adaption medium
- Faulty speed sensor signal low
Symptoms
- Harsh, delayed or missing 4-5 shift
- Engine flare during the shift
- Warning lamp
- Limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0784
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.