OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0780

Shift Error

Shift codes are a functional check of the gear change itself: the module compares the commanded shift with the speed trace and flags a shift that takes too long, is too short or abrupt, does not happen, flares or ties up. Ford does not use P0780–P0784 (its shift completion check feeds the solenoid codes), nor do GM's 2018–2025 tables. P0780 is the collective code when the faulty shift is not assigned to a gear. GM's 2006 Aisin-type five-speed counts five shifts that are too long, too short or tied up with fluid above 60 °C and lights the MIL at once; GM's Honda-built unit flags a 3–4 shift that stays in the lower ratio after two trips; Saab's 2010 Aisin six-speed counts ten faulty shifts without MIL, limits torque and keeps second and reverse. Nissan fixed P0780 on the 2021 Rogue CVT with new software.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 80

Possible causes

  • Fluid level wrong, fluid worn or contaminated high
  • Valve body, shift or pressure valve sticking high
  • Worn clutches or bands (mechanical damage) medium
  • Module software or shift adaption medium
  • Faulty speed sensor signal low

Symptoms

  • Harsh, delayed or missing shifts
  • Engine flare during shifts
  • Warning lamp
  • Limp mode with fixed gear, reduced power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0780

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication