P077F
Reverse 2 Incorrect Ratio
P077F checks the ratio in a second reverse gear: input speed divided by output speed lies outside the tolerance band around the target ratio – a slipping clutch, a wrong gear or a sensor fault. Only transmissions with two reverse ratios need it, such as Mercedes' 7G-Tronic (−3.42 and −2.23, with the second reverse kept in limp mode) and its 5G-Tronic predecessor; GM's 9- and 10-speeds, Ford's 10R and ZF's 8HP have one. No manufacturer document available to us uses this code; the check works like the other ratio codes such as P0736.
Possible causes
- Slipping clutch or brake in the second reverse power path high
- Fluid level low or fluid worn medium
- Solenoid or pressure regulator sticking medium
- Faulty input or output speed sensor low
Symptoms
- Reverse slips or engages late
- Limp mode
- Transmission warning or check engine light
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P077F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.