P0778
Pressure Control Solenoid B Electrical
Pressure control solenoids are current-controlled proportional valves, and what B and C mean depends on the design: on GM's clutch-to-clutch automatics they are the pressure valves of clutches 2 and 3, on GM's CVT B is primary pulley pressure and C line pressure, on Jatco CVTs B is the secondary pressure valve, on Saab's AF40 B and C are clutch valves SLC1/SLC2. P0778 is the electrical code for valve B. Allison compares current with the duty cycle after 125 ms, after one trip; Mitsubishi's 2009 CVT flags at most 400 mA with 750 mA commanded for 5 s; the 2022 Jatco CVT uses P0778 only for a short to ground; Saab's AF40 flags a deviation between commanded and feedback current of valve SLC1 and keeps only second gear and reverse. Harsh engagement, weak acceleration and no lock-up follow.
Possible causes
- Harness or connector shorted or open high
- Pressure valve B coil faulty – often only replaceable with the valve body high
- Transmission module faulty medium
- System voltage low
Symptoms
- Harsh engagement jolt
- Weak pulling away and acceleration
- Limp mode (Saab: second and reverse only)
- Check engine light
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0778
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- saabwisonline.com/9-5-9650/2010/4-transmission/automatic-transmission/fault-diagnosis-diagnostic-trouble-codes/dtc-p0778-or-p0965-p0967
- mitsubishitechinfo.com/data/GS41/2009/23/HTML/M123120660016900USA.htm
- mitsubishitechinfo.com/data/DG/2022/04/HTML/N5040201C0009600USA.htm
- gsi.ext.gm.com/gmspo/mode6/pdf/2006/2006trans9 .pdf