P0775
Pressure Control Solenoid B
Pressure control solenoids are current-controlled proportional valves, and what B and C mean depends on the design: on GM's clutch-to-clutch automatics they are the pressure valves of clutches 2 and 3, on GM's CVT B is primary pulley pressure and C line pressure, on Jatco CVTs B is the secondary pressure valve, on Saab's AF40 B and C are clutch valves SLC1/SLC2. P0775 is the general code for valve B. No manufacturer document available to us uses it; the trade journal MOTOR names it as a performance code of line pressure valve B on Ford's 5R55, set together with ratio codes after a broken overdrive servo. Sub-codes for performance, stuck on, electrical and intermittent follow (P0776–P0779).
Possible causes
- Valve body or pressure valve B worn or dirty high
- Line pressure wrong (load signal, main regulator) medium
- Fluid condition medium
- Circuit or coil low
Symptoms
- Harsh or slipping shifts
- Limp mode
- Check engine light
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0775
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.