P076E
Shift Solenoid H Intermittent
Shift solenoid H exists only on transmissions with eight or more solenoids. Ford's 10R80 ends at F, GM's 9- and 10-speeds report clutch pressure valve codes; the only documented user of the H block is the 2017–18 Genesis G80/G90 with shift-by-wire, where it concerns the on/off solenoid of the park lock rather than a shift valve. P076E is an intermittent fault of solenoid H. No manufacturer document available to us uses it; manufacturers usually count such dropouts within their circuit codes. A loose contact at the transmission connector is the most likely cause.
Possible causes
- Loose contact or corrosion at the transmission connector high
- Chafed harness, dependent on temperature or vibration medium
- Coil with heat-dependent winding fault low
Symptoms
- Limp mode or jolt at times, then normal again
- Warning lamp comes and goes
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P076E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.