P076C
Shift Solenoid H Stuck On
Shift solenoid H exists only on transmissions with eight or more solenoids. Ford's 10R80 ends at F, GM's 9- and 10-speeds report clutch pressure valve codes; the only documented user of the H block is the 2017–18 Genesis G80/G90 with shift-by-wire, where it concerns the on/off solenoid of the park lock rather than a shift valve. P076C means solenoid H is commanded off but stays effective, like P0762 for solenoid C. No manufacturer document available to us uses this code; Hyundai uses only P076A and P076D. The description follows the scheme for the other solenoids.
Possible causes
- Shift spool or proportional valve sticking in the applied position high
- Clutch not releasing (stuck or burnt) medium
- Solenoid stuck open or leaking medium
- Control wire shorted to ground (permanently powered) low
Symptoms
- Tie-up or jolt on shifts
- Delayed shifts, engine revs high
- Limp mode
- Check engine light
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P076C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.