P076A
Shift Solenoid H
Shift solenoid H exists only on transmissions with eight or more solenoids. Ford's 10R80 ends at F, GM's 9- and 10-speeds report clutch pressure valve codes; the only documented user of the H block is the 2017–18 Genesis G80/G90 with shift-by-wire, where it concerns the on/off solenoid of the park lock rather than a shift valve. Hyundai's bulletins name P076A both 'SBW park system fault' and 'on/off solenoid C (park – SBW)'. The remedy is replacing valve and electronic module or the park position switch and actuator, then the transmission module if the code returns. No other manufacturer uses P076A.
Possible causes
- Park lock on/off solenoid or electronic module faulty high
- Park position switch or actuator (shift-by-wire) medium
- Connector or wiring medium
- Transmission module low
Symptoms
- Check engine light
- Park lock or range selection fault, shift-by-wire warning
- Limp mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P076A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.