P0768
Shift Solenoid D Electrical
A shift solenoid is an electrically switched valve in the valve body. Manufacturers use these codes differently: Ford reports an open circuit with the base code and shorts separately, and the letter is not tied to a valve number (Saab's Aisin 9-5: C = valve S4, D = valve S5). P0768 is the collective electrical code for solenoid D. GM's 2006 Allison tables flag a driver hardware fault for more than 0.1 s, after one trip; Saab's Aisin 5-speed (valve S5) checks current draw and enters limp mode with 'check gearbox'; Hyundai's 8-speed uses it for the valve of the 4 & overdrive clutch and replaces valve and electronic module, then the module if it returns. Ford does not use P0768.
Possible causes
- Open or corroded wire, connector or internal harness high
- Solenoid coil open or shorted medium
- Solenoid supply (high-side switch) missing low
- Module driver faulty low
Symptoms
- Check engine or transmission warning lamp
- Limp mode in a fixed gear (Ford: fifth with maximum pressure)
- Harsh shifts
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0768
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.