OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0766

Shift Solenoid D Performance/Stuck Off

A shift solenoid is an electrically switched valve in the valve body; the module checks whether its clutch follows the command by gear ratio, shift time or a pressure switch. P0766 means solenoid D is commanded on but its clutch does not follow. Ford checks gear ratio over 10 events (2012) or 3 (2020–23 and the 2023 diesel); on the 6F transmissions solenoid D feeds two clutches, so Ford recognises a solenoid fault when both fail, while a single clutch fault sets ratio codes. Ford's 10R80 bulletins list it with a leaking clutch cylinder; Dodge's Aisin AS6 uses it for solenoid 4. GM does not use P0766.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 66

Possible causes

  • Clutch or brake of this circuit leaking or worn (piston seal, linings) high
  • Shift spool or proportional valve sticking (dirt, debris) medium
  • Fluid level or quality medium
  • Pressure switch faulty (Allison, Aisin) low

Symptoms

  • Upper gears (4th–6th) missing, or no reverse or engine braking in first (Ford)
  • Slip or engine flare on shifts
  • Limp mode
  • Check engine light

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0766

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication