OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0765

Shift Solenoid D

A shift solenoid is an electrically switched valve in the valve body. Manufacturers use these codes differently: Ford reports an open circuit with the base code and shorts separately, and the letter is not tied to a valve number (Saab's Aisin 9-5: C = valve S4, D = valve S5). P0765 is the general code for solenoid D and, at Ford, means an open circuit (0.5–5 s); shorts are P0982/P0983. On Ford's 6R80 and 6F transmissions solenoid D feeds either the low/reverse brake or the 4-5-6 clutch via a multiplex valve, on the 6R140 only the low/reverse brake; on the 2023 diesel its supply is shared with solenoid B and the converter clutch (P2669). A Ram 6.7 L bulletin traces P0765 to a leaking capacitor in the engine module.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 65

Possible causes

  • Open or corroded wire, connector or internal harness high
  • Solenoid coil open or shorted medium
  • Solenoid supply (high-side switch) missing low
  • Module driver faulty low

Symptoms

  • Check engine or transmission warning lamp
  • Limp mode in a fixed gear (Ford: fifth with maximum pressure)
  • No reverse or engine braking in first, or missing 4th–6th gears (Ford)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0765

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication