OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0763

Shift Solenoid C Electrical

A shift solenoid is an electrically switched valve in the valve body. Manufacturers use these codes differently: Ford reports an open circuit with the base code and shorts separately, and the letter is not tied to a valve number (Saab's Aisin 9-5: C = valve S4, D = valve S5). P0763 is the collective electrical code for solenoid C. GM's 2006 Allison tables flag a driver hardware fault for more than 0.1 s with the solenoid on or off, after one trip; Saab's Aisin 5-speed (valve S4) checks current draw with fluid above 20 °C and shows 'check gearbox'; Hyundai's 8-speed uses it for the 3-5-reverse clutch valve and replaces valve and electronic module, then the module if it returns. Ford does not use P0763.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 63

Possible causes

  • Open or corroded wire, connector or internal harness high
  • Solenoid coil open or shorted medium
  • Solenoid supply (high-side switch) missing low
  • Module driver faulty low

Symptoms

  • Check engine or transmission warning lamp
  • Limp mode in a fixed gear (Ford: fifth with maximum pressure)
  • Harsh shifts

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0763

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication