OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0762

Shift Solenoid C Stuck On

A shift solenoid is an electrically switched valve in the valve body; the module checks whether its clutch follows the command by gear ratio, shift time or a pressure switch. P0762 means solenoid C is commanded off but its clutch stays applied. GM's Honda-built five-speed flags a 2–3 shift slower than 0.8 s together with a 4–5 shift faster than 0.8 s, after two trips; the Allison 1000 a pressure switch 3 still applied after 2 s (up to 4 s when cold), after one trip. Ford calls it 'functionally failed on' – the CB26 brake does not release, which ties up the transmission when leaving second or sixth gear. Ford's 10R80 bulletins list it with a leaking clutch cylinder.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 62

Possible causes

  • Shift spool or proportional valve sticking in the applied position high
  • Clutch not releasing (stuck or burnt) medium
  • Solenoid stuck open or leaking medium
  • Control wire shorted to ground (permanently powered) low

Symptoms

  • Tie-up or jolt on shifts
  • Delayed shifts, engine revs high
  • Limp mode
  • Check engine light

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0762

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication