OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0761

Shift Solenoid C Performance/Stuck Off

A shift solenoid is an electrically switched valve in the valve body; the module checks whether its clutch follows the command by gear ratio, shift time or a pressure switch. P0761 means solenoid C is commanded on but its clutch does not follow. GM's Honda-built five-speed (Saturn Vue) combines a ratio check – first gear running in the window of second for 1.2 s – with a 3–4 shift faster than 0.8 s, after two trips. The 2007 Allison 1000 checks pressure switch 3 for 5 s, after one trip. Ford's 'functionally failed off' covers the CB26 brake circuit; Dodge's Aisin AS6 uses the code for solenoid 3, while Mitsubishi uses it for pressure switches.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 61

Possible causes

  • Clutch or brake of this circuit leaking or worn (piston seal, linings) high
  • Shift spool or proportional valve sticking (dirt, debris) medium
  • Fluid level or quality medium
  • Pressure switch faulty (Allison, Aisin) low

Symptoms

  • Gears missing or skipped
  • Slip or engine flare on shifts
  • Limp mode
  • Check engine light

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0761

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication