P075F
Transmission Fluid Level Too High
P075F is not a circuit fault but a condition: a working fluid level sensor reports a level above the target band – the counterpart of P070F. In the Allison patent the transmission module reports 'too high, drain a quart or more', measuring only with the vehicle at rest, warm fluid and low input speed. No manufacturer document available to us uses this code. Overfilling makes rotating parts churn the fluid, which foams, pressure control becomes unsteady, fluid escapes at the vent and temperature rises; an FCA bulletin traces poor shifting after repairs to overfilling. Automatic transmission fluid level depends strongly on temperature – topping up cold often overfills.
Possible causes
- Overfilled at fluid change or repair (wrong check temperature or procedure) high
- Level sensor drifting (reads too high) low
- Measured under poor conditions (slope, cold fluid) low
Symptoms
- Transmission fluid level warning
- Fluid escaping at the transmission vent
- Foaming fluid, unsteady or harsh shifts
- Transmission overheating
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P075F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.