P075A
Shift Solenoid G
Shift solenoid G only exists on transmissions with seven or more solenoids. Ford's 10R80 and 8F35 use solenoids A–F, GM's 9- and 10-speeds report clutch pressure valve codes, the Allison 1000 uses three; the only documented user of the G block is Hyundai/Genesis' 8-speed, which assigns P075A and P075D to its on/off solenoids. Hyundai's bulletins for the Genesis, Equus and G80/G90 (2012–2018) use P075A for the on/off solenoid 'SS-A' – on the G80/G90 in connection with the park lock – and treat it as a circuit fault: replace valve and electronic module, then load the valve data. That 'SS-A' is Hyundai's own numbering, not solenoid A in the J2012 scheme.
Possible causes
- On/off solenoid faulty high
- Electronic module or internal harness medium
- Connector or wiring medium
Symptoms
- Check engine light
- Limp mode or shift problems
- With shift-by-wire possibly a park lock fault
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P075A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.