OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0758

Shift Solenoid B Electrical

A shift solenoid is an electrically switched valve in the valve body. Manufacturers use these codes differently: Ford reports an open circuit with the base code and shorts separately, newer GM units have separate low/high codes, and the letter is not tied to a valve number (Saab's 9-5: A = valve S2). P0758 is the collective electrical code for solenoid B. GM's older 4-speeds flag open or short to ground at more than 43 of 50 failed counts; Subaru compares the driver transistor voltage for 30 ms, lights the MIL after two trips and holds third gear; on Saab's 5-speed Aisin box B is valve S3, checked by current; Hyundai's 8-speed uses it for the proportional valve of the 2-6 brake. Ford and newer GM do not use P0758.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 58

Possible causes

  • Open or corroded wire or transmission pass-through connector high
  • Solenoid coil open or shorted medium
  • Internal harness or electronic module in the transmission medium
  • Module driver faulty or valve supply missing low

Symptoms

  • Check engine or transmission warning lamp
  • Limp mode in a fixed gear, no upshifts
  • Harsh shifts from maximum line pressure

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0758

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication