OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0752

Shift Solenoid A Stuck On

A shift solenoid is an electrically switched valve in the valve body; together the solenoid states select the gear, and the module checks the result by gear ratio, slip or a pressure switch – the pattern of wrong gears shows which solenoid hangs off or on. P0752 means solenoid A is commanded off but its clutch stays applied. GM's 6T70 flags slip of 400 rpm for 2 s five times after one trip and then runs only reverse, first and third with maximum pressure; GM's T43 a ratio of 3.83–4.23 (first instead of fourth); GM 4-speeds the pattern 1-1-4-4 after two trips; Allison its pressure switch after 2 s. Ford calls it 'functionally failed on'. A clutch that does not release can tie up the transmission.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 52

Possible causes

  • Shift spool sticking in the applied position high
  • Solenoid stuck open or leaking medium
  • Clutch not releasing (burnt or stuck) medium
  • Contaminated or wrong fluid medium

Symptoms

  • Wrong, often too low gear, engine revs high
  • Tie-up or jolt on shifts
  • Limp mode (GM: reverse, 1st, 3rd only)
  • Check engine light

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0752

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication