OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0751

Shift Solenoid A Performance/Stuck Off

A shift solenoid is an electrically switched valve in the valve body; together the solenoid states select the gear, and the module checks the result by gear ratio, slip or a pressure switch – the pattern of wrong gears shows which solenoid hangs off or on. P0751 means solenoid A is commanded on but valve, clutch or gear do not follow. GM's 6T70 flags a ratio of 1.34–1.48 with slip of 400 rpm for 0.3 s eight times and locks out first gear; GM 4-speeds recognise the pattern 2-2-3-3; both after two trips. Allison checks its pressure switch for 5 s after one trip. Ford's 'functionally failed off' covers the whole clutch circuit, and its 10R80 and 8F35 bulletins show purely mechanical causes such as a leaking clutch cylinder.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 51

Possible causes

  • Shift spool in the valve body sticking (dirt, debris) high
  • Internal leak or clutch fault in the circuit medium
  • Solenoid mechanically sluggish or screen clogged medium
  • Fluid level or quality wrong medium

Symptoms

  • Gears missing or skipped
  • Pulling away in the wrong gear, weak acceleration
  • Limp mode or gear lock-out
  • Check engine light

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P0751

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication