P0750
Shift Solenoid A
A shift solenoid is an electrically switched valve in the valve body. Manufacturers use these codes differently: Ford reports an open circuit with the base code and shorts separately, newer GM units have separate low/high codes, and the letter is not tied to a valve number (Saab's 9-5: A = valve S2). P0750 is the general code for solenoid A and is used in practice for an open circuit: Ford's step automatics (2012–2023) set it when the smart driver feedback disagrees with the command for 0.5–5 s, with shorts to ground and power as P0973/P0974; Ram's 6.7 L with Aisin transmission calls it 'control circuit open', and a 2023 bulletin traces it to a leaking capacitor in the engine module. GM does not use P0750. With the solenoid unpowered the transmission falls back to a hydraulic default gear with maximum pressure.
Possible causes
- Open or corroded wire or transmission pass-through connector high
- Solenoid coil open or shorted medium
- Internal harness or electronic module in the transmission medium
- Module driver faulty or valve supply missing low
Symptoms
- Check engine or transmission warning lamp
- Limp mode in a fixed gear, no upshifts
- Harsh shifts from maximum line pressure
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0750
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.