P074D
Unable to Engage Gear 5
'Unable to engage' means the transmission does not reach the commanded gear – the opposite of 'stuck in gear', where a gear cannot be disengaged. Documented users are dual-clutch transmissions, whose shift forks are moved hydraulically and watched by travel sensors: GM's 8-speed in the 2020–23 Corvette, Maserati's MC20 and – for the odd gears only – Acura's RLX Sport Hybrid, whose 'odd gear monitor' is part of an emission recall with permanent codes. No manufacturer publishes thresholds. P074D means the fifth gear, on the odd sub-gearbox, cannot be engaged; a gear that will not disengage is P073A, slip in an engaged gear P0735. GM's bulletin first runs a learn procedure and cleans valves only if system pressure codes are present; Maserati checks system pressure (20–30 bar). If neither helps, the mechanics are at fault.
Possible causes
- Shift fork valve or solenoid in the mechatronic unit sticking (dirt, wear) high
- System pressure unstable or too low (pressure valve, pump, fluid level) medium
- Shift fork, sleeve, synchronizer or dogs damaged medium
- Learned shift fork or clutch values lost or wrong medium
- Module software or calibration low
Symptoms
- Gear 5 skipped or not engaged
- Transmission warning or check engine light, possibly limp mode with one sub-gearbox locked out
- Jerking, delayed pulling away or shifting
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P074D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.