OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0744

Torque Converter Clutch Circuit Intermittent

The torque converter clutch (lock-up) connects pump and turbine mechanically; a solenoid – on/off, pulse-width modulated or proportional – moves a control valve in the valve body. Slip is engine speed minus turbine speed. Manufacturers do not use P0740–P0744 uniformly: Ford uses P0740 for open, P0742 for short to ground and P0744 for short to power, and reports stuck on as P2758. In J2012 P0744 is an intermittent fault in the converter clutch circuit, but no manufacturer document available to us uses it that way: Ford flags a short to power via the driver feedback line after 0.5–5 s with MIL, and Nissan's CVT bulletins treat it as a functional converter fault checked at the valve body and belt. GM does not use it. Short interruptions make the clutch drop out and reapply, and lock-up may be disabled for the trip.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 44

Possible causes

  • Loose contact or corrosion at the transmission connector or harness high
  • Ford: control wire shorted to positive medium
  • Solenoid with temperature-dependent winding fault medium
  • Nissan CVT: converter or valve body mechanical low

Symptoms

  • Check engine light
  • Lock-up missing or jerky at times
  • Engine speed jumps when cruising

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0744

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication