OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P073E

Unable to Engage Reverse

P073E means reverse is commanded but not reached. Two uses are documented. With electronic gear selection (shift-by-wire) GM compares the commanded range with the actual range reported by the transmission and flags it if reverse is not reached within 1.8–3 s in the selector or diesel engine module, or 10 s in petrol engine modules, after two trips; GM bulletins name a range actuator centred wrongly (LaCrosse, XT5) and software after an over-the-air update (2025 Equinox/Terrain). On dual-clutch transmissions (2020–23 Corvette, Maserati MC20) it means the reverse gear cannot be engaged. Stuck in reverse is P072B, slip in reverse P0736.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 3E

Possible causes

  • Range actuator or park module centred wrongly or faulty (shift-by-wire) high
  • Module software (e.g. after an over-the-air update) medium
  • Range sensor reports the wrong actual range medium
  • Reverse clutch or brake, valve or shift fork (DCT) medium
  • Fluid level or system pressure low

Symptoms

  • No reverse, or R not accepted
  • Transmission warning, check engine light after two trips (GM)
  • Display shows R but the vehicle does not reverse

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P073E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication