P0734
Gear 4 Incorrect Ratio
The transmission module divides input (turbine) speed by output speed and compares the result with the ratio of the commanded gear; a deviation means slip – a clutch or brake not holding, too little pressure – or a wrong gear. Thresholds: Ford more than 30 rpm off for 1.8 s three times (diesel 2023: over 20 % for 12 s), GM's 2006 tables and the Allison 1000 converter slip of 200–230 rpm for 2.25 s after one trip, Saab's Aisin boxes over 20 % twelve times without MIL. P0734 concerns fourth gear. A 2006 GM table separates it explicitly from P0730: fourth gear showing the ratio of third is P0730, any other deviation P0734. Slip shows as raised engine speed or no upshift into fourth. On GM manual transmissions it checks the gear position sensor.
Possible causes
- Fluid level too low or fluid worn or contaminated high
- Clutch or brake for fourth gear worn (linings, piston seal) high
- Sticking shift or pressure valve, leaking valve body gasket, blocked passages medium
- GM manual transmissions only: gear position sensor faulty or not learned medium
Symptoms
- Slipping or flare in fourth gear, engine speed higher than expected
- Harsh or delayed shifts
- Limp mode (Aisin: second gear and reverse only), transmission warning
- Check engine light depending on manufacturer
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P0734
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.