P072B
Stuck in Reverse
Ford's DPS6 dry dual-clutch transmission moves its gears with two electrically driven shift drums whose position is read by Hall sensors: drum A shifts 1st, 3rd and 5th, drum B reverse, 2nd, 4th and 6th. Ford's 2012 summary lists 'stuck in gear' codes for each drum: the module commands the drum out of a gear, but the gear stays engaged. It gives no thresholds or MIL rating. P072B is the code for drum B: reverse cannot be disengaged. The transmission then locks out sub-gearbox B and can only use drum A (1st, 3rd, 5th), or the car is stranded. Slip in reverse is P0736.
Possible causes
- Shift fork or synchronizer for this gear sticking medium
- Shift drum B motor, Hall position sensing or driver faulty medium
- Transmission module low
- On planetary automatics: clutch or brake not releasing (sticking valve) low
Symptoms
- Transmission stays in one gear, no further shifts
- Limp mode, transmission warning
- Clunking or blocking when shifting
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P072B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.