P0728
Engine Speed Input Circuit Intermittent
The transmission module needs engine speed for converter slip, shift quality and to check the turbine speed. Today it almost always arrives over CAN from the engine module with a validity flag; only GM's 2007 Allison 1000 tables show a separate engine speed sensor read by the transmission module. P0728 means the engine speed signal at the transmission module drops out briefly. No manufacturer document available to us uses this code: GM's Allison 1000 detects jumps and noise of this input under P0726/P0727, and Saab's bus-based systems use those codes, too. By analogy with P0718/P0723 dropouts are counted. A loose contact in the signal or CAN circuit or an intermittent crankshaft sensor fault in the engine module is the likely cause; shifts may be harsh at times.
Possible causes
- Loose contact in signal or CAN circuit high
- Sensor (if fitted) dirty or loose medium
- Intermittent crankshaft sensor fault in the engine module medium
- Transmission module low
Symptoms
- Occasional transmission warning lamp
- Harsh shift now and then
- Converter clutch releases occasionally
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P0728
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.