OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0726

Engine Speed Input Circuit Range/Performance

The transmission module needs engine speed for converter slip, shift quality and to check the turbine speed. Today it almost always arrives over CAN from the engine module with a validity flag; only GM's 2007 Allison 1000 tables show a separate engine speed sensor read by the transmission module. P0726 means the engine speed value is present but implausible. The Allison 1000, which reads its own sensor, flags a jump of 600 rpm within 0.15 s or noise of ±650 rpm, with the engine above 600 rpm and a gear engaged, after two trips. Saab's 9-3 of 2000, which receives the value over the bus, flags more than 7200 rpm for at least 10 s. The converter clutch is then locked out and shifts may be harsh. No signal at all is P0727.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 26

Possible causes

  • Engine speed sensor at the transmission (Allison) dirty or faulty, loose contact high
  • Interference (shielding, ground) medium
  • Wrong bus value from the engine module (crankshaft sensor problem) medium
  • Transmission module low

Symptoms

  • Transmission warning lamp, possibly check engine light
  • Torque converter clutch locked out
  • Harsh shifts or limp mode
  • Often an engine code (crankshaft sensor) as well

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0726

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication