OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0725

Engine Speed Input Circuit

The transmission module needs engine speed for converter slip, shift quality and to check the turbine speed. Today it almost always arrives over CAN from the engine module with a validity flag; only GM's 2007 Allison 1000 tables show a separate engine speed sensor read by the transmission module. P0725 is the general fault of this input; with CAN it means the engine module marks its speed value as invalid. Saab's Aisin transmissions and a 2006 GM table set it after about 4 s, the GM table with immediate MIL. A Saab bulletin notes that behind P0725 there is always a crankshaft or camshaft sensor code in the engine module (P0016, P0335–P0339) – so read the engine module first. Limp mode follows; a completely missing CAN message is U0100.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 25

Possible causes

  • Crankshaft or camshaft sensor fault in the engine module (speed invalid there) high
  • CAN fault between engine and transmission module (wiring, termination, connector) medium
  • Engine module software or fault low
  • Transmission module faulty low

Symptoms

  • Transmission warning lamp, possibly check engine light
  • Torque converter clutch locked out
  • Harsh shifts or limp mode
  • Often an engine code (crankshaft sensor) as well

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0725

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication