OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0724

Brake Switch B Circuit High

Brake switch B is the brake signal to the transmission module or a second brake switch channel, used to release the converter clutch, adapt shift strategy on grades and cancel cruise control. Low and high describe the signal voltage, and what that means depends on polarity: GM's converter clutch brake switch is closed at rest (12 V), while Saab's Trionic 8 sees 12 V when braking. Detection is always a plausibility check against driving: the brake reads applied during accelerations or never applied during decelerations. P0724 means the signal stays high. For GM that reads as brake never applied: 2006 transmission modules flag it after eight decelerations without a brake signal of at least 2 s, without MIL. Saab's Trionic 8 flags a brake light signal that reads on while accelerating from 3 to 40 km/h, four times, and disables cruise control. The opposite is P0719.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 24

Possible causes

  • Brake light switch sticking or misadjusted high
  • Signal wire shorted to positive (Saab T8) or switch permanently closed (GM) medium
  • Retrofitted trailer or LED lights feeding back low
  • Module input faulty low

Symptoms

  • Cruise control cannot be activated or switches off
  • Unusual shifting, converter clutch behaviour changed
  • No downshift on uphill grades (Subaru)
  • Brake lights stay off or on

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P0724

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication