OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0723

Output Shaft Speed Sensor Circuit Intermittent

The output shaft speed sensor (Hall or inductive) reports the speed of the transmission output; it gives the gear ratio together with input speed and on many vehicles also the road speed for speedometer and cruise control. P0723 means the output speed drops or jumps briefly. GM's 2006 tables flag road speed falling below 61 rpm while driving; the 2019–2025 modules count sudden drops (for example 700 rpm) and fail after more than five, after one trip. In Ford vehicles the ZF 6HP26 flags a drop of more than 1000 rpm with the converter clutch locked, the CFT30 more than 6000 rpm per second. The speedometer needle twitches, shifts become erratic and limp mode may follow at times. Loose contacts are the usual cause.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 23

Possible causes

  • Loose contact, corroded connector or chafing high
  • Electrical interference (shielding, ground, added consumers) medium
  • Metal debris on the sensor or loose mounting medium
  • Sensor faulty internally (temperature-dependent) medium

Symptoms

  • Speedometer needle twitches or drops briefly
  • Occasional wrong shifts or downshift jolts
  • Warning lamp
  • Limp mode at times

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0723

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication