P071F
Transmission Mode Switch B Circuit High
A transmission mode switch selects an alternative shift schedule such as sport, winter or tow/haul; J2012 does not define which button is A or B. No manufacturer document available to us uses P071A–P071F: GM monitors its analog drive mode switch under its own codes (low below 21–29 % of 5 V, high from 94 %, 200 of 250 samples, two trips), which shows how such buttons are read as coded voltages. P071F means the signal of mode switch B is above its upper limit – an open circuit or short to positive. Mode B then cannot be selected. The opposite is P071E.
Possible causes
- Wire or connector to the button open high
- Button open internally medium
- Signal wire shorted to positive low
Symptoms
- Mode B cannot be selected or stays active
- Mode indicator missing or flashing
- Transmission stays on the normal shift schedule
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P071F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.