P071A
Transmission Mode Switch A Circuit
A transmission mode switch selects an alternative shift schedule such as sport, winter or tow/haul; J2012 does not define which button is A or B. No manufacturer document available to us uses P071A–P071F: GM monitors its analog drive mode switch under its own codes (low below 21–29 % of 5 V, high from 94 %, 200 of 250 samples, two trips), which shows how such buttons are read as coded voltages. P071A is the general circuit fault of mode switch A: its state is invalid or implausible. The transmission then usually stays on its normal schedule. Low and high are P071B/P071C, switch B has P071D–P071F; the range sensor (PRNDL) is P0705 ff.
Possible causes
- Mode switch A faulty (selector lever or console) high
- Wiring or connector in the console damaged (spilled drinks, chafing) medium
- Resistor coding drifted (analog buttons) low
- Control module faulty low
Symptoms
- Mode A cannot be selected or stays active
- Mode indicator missing or flashing
- Transmission stays on the normal shift schedule
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P071A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.