P0719
Brake Switch B Circuit Low
Brake switch B is the brake signal to the transmission module or a second brake switch channel, used to release the converter clutch, adapt shift strategy on grades and cancel cruise control. Low and high describe the signal voltage, and what that means depends on polarity: GM's converter clutch brake switch is closed at rest (12 V), while Saab's Trionic 8 sees 12 V when braking. Detection is always a plausibility check against driving: the brake reads applied during accelerations or never applied during decelerations. P0719 means the signal stays low. For GM that reads as brake applied: 2006 transmission modules flag it after eight accelerations without the brake releasing, without MIL. Saab's Trionic 8 flags the brake light signal not changing during four decelerations from 40 to 3 km/h and disables cruise control. The opposite is P0724.
Possible causes
- Brake light switch faulty or misadjusted high
- Wire to the module open (GM) or shorted to ground (Saab T8) medium
- Connector at the pedal box corroded medium
- Brake light circuit fuse blown low
Symptoms
- Cruise control cannot be activated or switches off
- Unusual shifting, converter clutch behaviour changed
- No downshift on uphill grades (Subaru)
- Brake lights stay off or on
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P0719
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2006/2006trans11 .pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2006/2006trans5_a .pdf
- saabwisonline.com/9-3-9440/2003/dtcs/t8/p0719-00
- saabwisonline.com/9-2x-9346/2005/4-transmission/automatic-transmission-diagnostics-2-5i/diagnostic-procedure-with-diagnostic-trouble-code-dtc/fault-diagnosis-fault-codes/dtc-p0719-torque-converter-brake-switch-b-circuit-low