OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0711

Transmission Fluid Temperature Sensor A Circuit Range/Performance

P0711 means the fluid temperature signal is electrically valid but implausible. Manufacturers check three things: the fluid does not warm up as expected (GM 2025 still below 15 °C after the calibrated warm-up time, Saab's AF40 below 20 °C after 10 minutes of driving), the value is stuck (Ford: within ±2 °F for about 2.5 minutes below 70 or above 225 °F), or it jumps unrealistically. GM's 6T70 compares it with the module's internal temperature. The MIL rating varies: GM's newer modules after two trips, Saab AF40 none, Ford none; a 2013 Ram 6.7 bulletin moved P0711–P0714 from one to two trips. A substitute value then limits adaption and converter clutch control.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 11

Possible causes

  • Fluid temperature sensor drifting or stuck high
  • High contact resistance in connector or harness (oil, corrosion) medium
  • Very cold weather or short trips (fluid does not reach warm-up threshold) medium
  • Outdated module software low
  • Fluid cooler thermostat faulty low

Symptoms

  • Harsh or late shifts
  • Torque converter clutch applies late or not at all
  • Check engine or transmission lamp depending on manufacturer
  • Implausible fluid temperature in the scan tool

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0711

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication