P070F
Transmission Fluid Level Too Low
P070F is not a circuit fault but a condition: a working fluid level sensor reports a level below the target band. In the Allison patent the module compares the measured height in millimetres with a tilt-dependent band and reports at least a quart too little or too much – only with the vehicle at rest, fluid above about 30–40 °C and low input speed. No manufacturer document available to us uses this code. Take it seriously: real fluid loss leads to slipping, overheating (P0218) and ratio errors. Leaks at the pan gasket, seals or cooler lines and wrong filling after service are the usual causes.
Possible causes
- Leak (pan gasket, shaft seals, cooler lines) high
- Underfilled after fluid change or repair medium
- Level sensor reading wrong (drift) low
Symptoms
- Warning: transmission fluid level low
- Slipping gears, delayed engagement
- Transmission overheating
- Oil spots under the vehicle
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P070F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.