OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P070C

Transmission Fluid Level Sensor Circuit Low

Fluid level sensors in the transmission sump report the oil level to the transmission module as a voltage; an Allison patent converts it to millimetres and only accepts readings with the vehicle at rest, warm fluid, low input speed and a tilt correction. Such sensors are mainly found in heavy automatic transmissions. No manufacturer document available to us uses this code. P070C means the sensor signal is below its lower limit – typically the signal wire shorted to ground or a sensor shorted internally. Because the oil level does not usually affect emissions directly, a rating without the check engine light is likely; expect a transmission warning or a missing level display. An actually low oil level is P070F.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 0C

Possible causes

  • Signal wire to the level sensor shorted to ground (chafing, transmission connector) high
  • Level sensor faulty internally medium
  • Transmission connector soaked in oil or corroded medium
  • Module input faulty low

Symptoms

  • Fluid level display missing or warning to check transmission fluid
  • Usually no driveability problems
  • Transmission warning lamp depending on manufacturer

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P070C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication