OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0707

Transmission Range Sensor A Circuit Low

The transmission range sensor (selector or multifunction switch, PRNDL) reports the selected range; it may be a multi-contact switch with a bit pattern per position, an analog sensor with two opposing voltages adding up to 5 V, or a contactless PWM sensor. Its second channel has its own codes (P2801–P2805). P0707 means the sensor A signal is too low – usually a short to ground or lost supply. GM's T87A transmission module flags a PWM duty cycle below 8.8 % for 0.5 s within 1.5 s, with the lamp in the first trip; Ford flags a duty cycle below 10 %, an analog sensor below 0.2 V for 5 s or a dual-analog channel below 0.127 V for 200 ms; Saab's 9-5 (9650) below 0.127 V for 100 ms twice. 'Low' refers to the signal, not to a gear.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / number7 / 07

Possible causes

  • Signal wire shorted to ground (chafing at the transmission case) high
  • Sensor faulty internally medium
  • Sensor supply missing (5 V reference, fuse) medium
  • Connector corroded or oil in the connector low

Symptoms

  • Check engine and/or transmission warning lamp
  • Transmission limp mode, fixed gear, harsh shifts
  • Starting problems in P/N or start interlock
  • Wrong gear indication, reversing light not working

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0707

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication